Car audio/video system which is named car AV, 12-volt,mobile audio and other terms are used to describe the video or?sound system fitted in an automobile. While 12-volt audio/video systems are also marketed, used or manufactured for marine,?buses and aviation.?We will introduce?on cars as the most common application.
From the earliest days of radio, enthusiasts had adapted domestic equipment to use in their cars. In the 1960s, tape players using reel to reel equipment, Compact Cassettes, and then 8-track cartridges were introduced for in-car use.
A stock car audio system refers to the OEM application that the vehicle?s manufacturer specified to be installed when the car was built. A large after market industry exists where the consumer can at their desire replace many or all components of the stock system.
In modern cars, the primary control device for an audio system is commonly referred to as a head unit, and is installed in the center of the dash panel between the driver and the passenger. In older vehicles that had audio components as an option, such devices were mounted externally to the top of or underneath the dash. Car speakers often use space-saving designs such as mounting a tweeter directly over a woofer or using non-circular cone shapes. Subwoofers are a specific type of loudspeaker for low frequency reproduction. Extremely loud sound systems in automobiles, which have been nicknamed ?boom cars?, may violate the noise ordinance of some municipalities.
Stock unit
A stock car audio system refers to the OEM application that the vehicle?s manufacturer specified to be installed when the car was built. A large after market industry exists where the consumer can at their desire replace many or all components of the stock system.
Speakers
A set of speaker drivers removed from a passenger vehicle.Car speakers are largely functionally identical to any other loudspeaker design with key components specialized for use in mobile environments, and generally serve an identical purpose. One major key design difference is mult-axial mounting of different types of loudspeakers in the same footprint, such as a tweeter directly mounted over a woofer. Another key difference is non-circular cone shapes, such as square, oval, or even triangular. Both of these features reflect a significant reduction in space and size that a speaker may occupy in a vehicle cabin.
Material construction may also include more exotic and hearty components more suitable to mobile use. Marine speakers may have plating for corrosion resistance. Cones may be coated with a substance to resist expansion and contraction under high vehicle cabin temperatures, known to reach 140 ?F (60 ?C) in the sun. Subwoofers may also be found in mobile audio applications where a cabin speaker may lack the desired low frequency response on its own.
Before stereo radio was introduced, the most common speaker location was in the middle of the dashboard pointing through perforations towards the front windshield. In most modern applications, speakers are mounted certain common locations including the front deck (or dash), the rear deck (or parcel shelf), the kick panel (located in the footwell below the A-pillar,) or the doors. In the case of subwoofers, mountings are usually under the seat or in the trunk. Each position has certain strengths and limitations from both a quality of sound, and a vehicle manufacturing perspective.
5.1 and even 7.1 channel surround sound systems, as well as THX II Certified, are now being integrated into some cars by both aftermarket enthusiasts and car manufacturers themselves. These systems include the full complement of front left, right and center speakers along with rear right and left surround speakers.
Amplifiers
A car audio amplifier.
Blaupunkt Class T amplifierBasically a mobile audio amplifier, a car ?amp? is a term used to refer to a dedicated electronic amplifier separated from the other components of the system. Though most head units have an amplifier, some do not, or lack the desired power or additional features (e.g., equalization controls or crossover systems). External amplification is available and most often used when existing amplification is insufficient. External amplifiers can be mounted in a different part of the car than the ?head unit?; in many cases, an additional amp is mounted in the trunk. This is usually the case when powering a subwoofer, where desired wattage may be several multiples more compared to other cabin speakers.
Though less common, OEM external amplification can be found in ?premium? audio packages, or in luxury cars. More common is aftermarket amplification installed later to satisfy the expansion of an existing system in some way. During operation, it is common for a vehicle?s charging system to fluctuate, so a regulated amplifier will maintain its power output regardless of voltage fluctuation. Amplifiers rated at 100 watts at 14.4 volts can not be regarded equal as to an amplifier that can maintain 100 watts at 12 volts. Outside of certain standards, it is not uncommon for manufacturers to list a 14.4 rating and not post a 12 volt value.
Head unit
A Panasonic single DIN head unit, combining radio, CD and MP3In modern cars, the primary control device for an audio system is commonly referred to as a head unit, and is installed in the center of the dash panel between the driver and the passenger. In older vehicles that had audio components as an option, such devices were mounted externally to the top of or underneath the dash.
The headunit itself is usually a multi-purpose device that houses multiple types of components in its housing. The most common components are a radio receiver/tuner usually with AM and FM bands, and a small amplifier for driving an audio signal to speakers. Other possible components include various media devices, such as (in older vehicles) a tape player (either 8-track or cassette), CD player, DVD player, Minidisc, USB flash memory, and even a hard disk drive typically used in notebook computing. Many head units also feature a DSP component, and equalization component (such as bass and treble controls), or a control interface for another feature on the car (such as a back-up/parking camera, navigation system, trip odometer, etc).
Due to auto manufacturing differences over the years, aftermarket headunit products are manufactured in multiple form factors. The primarily used size is mostly referred to by its legacy name of DIN, which refers to ISO 7736. DIN headunits come as single DIN or double DIN. A third less common standard is used mostly by Chrysler group and for a time Mitsubishi in their OEM devices.
Dampening
Sound deadening material is often used in the door cavities and boot/trunk area to dampen excess vibration of the panels in the car in response to loud subwoofer bass tones, especially the boot/trunk. The most common type of deadening is either butyl or rubberized asphalt, a product which has an adhesive quality and can be applied by simply pressing it into place with a roller and using a heat gun (or hair dryer). Other types of deadening can be sprayed on, but they are less common because of the additional installation difficulties.
Capacitors
A powerful after-market audio system installation in a ToyotaCapacitors are used to store energy for the amplifier to draw on demand. They come in many different sizes ranging from 0.5 farad to well over 100 farads and their intended function is to temporarily cover the short-burst electrical demands of a car audio system that have exceeded the general electrical capabilities of the vehicle. There is little evidence to suggest they impart any benefit to the system, however, due to their low energy storage (compared with the battery) and exponential nature of capacitor voltage decay.
Subwoofers
Subwoofers are a specific type of loudspeaker for low frequency reproduction. Mobile ?subs? are not very different from any other application of sub in terms of construction. However it is more common in aftermarket that visual aesthetics take on a more significant role in design than other types of sub drivers, including high contrast paint schemes, grill covers, translucent or refractive materials. Typical subwoofer drivers range in size from an 8? diameter to 10? or 12?; more rarely, some car audio system s may have 15?, 18?, 21?, 22?, 24? or even 32? subwoofers.
A subwoofer is used when existing low frequency production is unsatisfactory, either in frequency range or in volume. Design goals have led to subwoofer, both driver?s alone and whole packages, with some extreme difference from one another. Space conscious design has reduced some driver depth to 2? or less, or enclosure depth to 3?. Pure loudness through increasing sound pressure has led to some drivers with excursions as great as 4? and vented components to cool the ?motor? of the speaker. Quality and clarity has led to driver enclosures being tuned by construction to resonate or neutralize certain frequencies.
Source: http://www.autocardvdgps.com/blog/2013/01/introduce-to-car-audiovideo-system/
bengals the stand josh mcdaniels cotton bowl wizards of waverly place cedric benson playoff schedule
Source: http://wilsonstewsart.blogspot.com/2013/01/introduce-to-car-audiovideo-system.html
brandon lloyd brandon lloyd celtic thunder fabrice muamba collapse prometheus trailer patrice oneal shamrock
Source: http://suhanasharma524.blogspot.com/2013/01/newspaper-introduce-to-car-audiovideo.html
wizards of waverly place cedric benson playoff schedule charles addams pinewood derby cars republican debate tonight tinker tailor soldier spy
Source: http://kyfygfdt.posterous.com/newspaper-introduce-to-car-audiovideo-system
Kathi Goertzen Johnny Pesky spice girls justin theroux Bumbo recall USA Basketball taio cruz
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.